- Enabling color management with multiple equipment interlocking with IS-100
- High-precision color reproduction using IS-mini
Enabling color management with multiple equipment interlocking with IS-100
By having IS-mini interlock with IS-100 connected to the main camera and main monitor, and having the equipment information of the shooting camera and image checking monitor to be connected with IS-100, registered in IS-100, the color conversion table is automatically sent from IS-100 to IS-mini. This enables to check the final images with appropriate color conversion according to the color conversion table of each IS-100, even if a camera or monitor of a different manufacturer and model than the main camera and main monitor is connected to IS-mini. Ideal color management is possible on large scale shooting sets, where multiple cameras and monitors are used at the same time.
If IS-mini recorded with the color conversion table used and generated with IS-100 is connected with the monitor and image output equipment, used in post-production for editing and finishing up images, color intended by the director on the film set is correctly reproduced on the monitor, which streamlines post-production work.
High-precision color reproduction using IS-mini
Monitor calibration is possible if the figure measured with the spectrophotometer for the monitor is entered into the computer and IS-mini recorded with the color conversion table created on the computer is connected with the monitor and image output equipment. Anyone can easily conduct calibration by following the instructions of the accompanying software IS-mini MANAGER, even if they have no special knowledge of color management. This enables color matching for not only shooting sets but also monitors in a broad range of business operations that handle images including production companies, post-production and advertisement production companies.
Camera preview of the shot images is available on the monitor in appropriate color reproduction according to the color conversion table of camera, recorder and monitor generated by IS-100 if this IS-mini is connected with the camera (or recorder) and monitor on the film set.
|Product name||Image Processing System IS-mini|
|Network||10/100 BASE-T Ethernet|
|Interface||USB2.0, LAN (RJ45) × 1|
|HD-SDI||1.5G-SingleLink BNC connector (1 for input, 1 for output) complied with SMPTE 292|
|HDMI||1 for output (no sound output)|
|Power||DC 5V (AC adapter included)|
|Dimensions / weight||103(W) × 81(D) × 29(H)mm Approx. 260g (excluding cables)|
Please enter your email address below. You will receive a link to reset your password.Ahh, wait, I remember now!