Our customers talked, we listened. You wanted 4 cameras, we brought 4 cameras. You asked for 4K capabilities, now you can work in 4K. Smart Assist 4 allows to record, playback and do all the FX with one camera in superb 4K or with 4 HD (or 2K) cameras, choice is on you.
UPTO 128 CAMERAS
You can control upto 4 HD (or 2k) cameras but for single take shots you can link upto 8 Smart Assist and record and playback 32 cameras, or even extend by using quad splits and go upto 128 cameras! Smart Assist 4 has 12 routed SDI outputs so you can choose 12 independent video feeds including multi viewers and there are small OLED displays to tell you what is every output, to ease the cabling.
BATTERIES & MAINS
Smart Assist can be powered with mains using the available power adapter, block batteries or regular camera batteries. The system has both hot swap between power sources and an internal UPS system that will warn you when all power sources are disconnected and will let you run the system for 2 minutes wihout any power source, so that you can put a new battery wihtout any unexpected shutdowns.
WORK WITH iDEVICES
Smart Assist can stream live video or independent playback to iPhones and iPads (upto 16 devices), each with independent permissions and watermarks. It can also convert your iPad or iPhone in your video village remote control, to route all the video as desired from a convinient wireles mobile device.
With the built-in video router you can feed and control your complex video village from the built-in touchscreen or using the iPhone app. Choose any feed to be routed to any of the 12 outputs, give it a name and you’ll see the OLED displays show that name by the BNC connector to ease cabling. Not only the label is displayed, also the video content (live, camera, quad split...).
A new display brings superb picture quality, is brighter and can incorporate matte finish to avoid reflections or special finish for sunlight readable properties. It is a capactive touchscreen, so it has more precision and there is no need to recalibrate.
WIFI & BLUETOOTH
Smart Assist 4 comes with SMA connectors on top so that you can choose whatever antennas you may need for each shooting location: regular antenas for closer distances or bigger high gain antennas for a longer range of operation.
The new builtin Bluetooth antenna will improve this operation.
CPU and GPU performance have dramatically increased, and video delay has been lowered to the minimum.
|4 CAMERAS MODE||1 CAMERA MODE|
|Resolution||2K or HD||4K|
|Inputs||4x SDI||1x SDI|
|Outputs||12x SDI (2K or HD routed video)||3x SDI (4K routed video)|
Please enter your email address below. You will receive a link to reset your password.Ahh, wait, I remember now!