Using a PAG charger to charge and manage your PAG batteries is always the best way to achieve the maximum number of cycles and the longest possible working life.
The 4-position PAGlink PL16+ is the ideal workshop charger for broadcast organisations and rental companies. It greatly reduces the number of chargers required to manage a large PAGlink Gold Mount Li-Ion battery inventory.
4 fully-discharged batteries will be fully-charged simultaneously in less than 6 hours; 8 batteries in less than 12 hours.
The PL16+ is designed for charging simultaneously 16 PAGlink batteries in less than 24 hours. However, it is possible to charge a maximum of 32 batteries, 8 linked on each position, without user-intervention. The estimated charge time is approximately 48 hours.
The charging process is managed automatically by the PAGlink batteries and PAG’s Intelligent Parallel Charging software.
PAGlink batteries communicate their individual state-of-charge to the charger. The most discharged batteries are given priority until all the batteries reach a similar state-of-charge. The batteries are then charged simultaneously, using available current in the most efficient way, until they are fully-charged. They can be left safely on the charger until they are ready to use.
During charging, the percentage state-of-charge of each PAGlink battery is indicated on its individual display. The battery’s numeric display can be inverted, for legibility, with a single button press, and reverts automatically after removal. The stages of the charging process for each channel are clearly indicated on the charger’s large backlit LCD screen.
An automatic recovery feature is included for deeply discharged batteries. Additionally, the charger will automatically reset Li-Ion batteries if their cut-out has been tripped.
The PL16+ is compact, quiet and cool-running, and features a hard-wearing aluminium case. It weighs only 3.5lbs (1.6kg), and its slim design makes it easy to transport.
- 4-position simultaneous fast-charger
- 4 x Gold Mount connectors
- Features PAG iPC - Intelligent Parallel Charging
- Simultaneously charges 4 PAGlink batteries in less than 6 hours
- Simultaneously charges 16 PAGlink batteries in less than 24 hours
- Capable of charging 32 PAGlink batteries without user-intervention
- Also charges the latest non-linking PAG Li-Ion batteries (1 per channel)
- High-powered 100W output (6A at 16.8V)
- Accepts firmware updates via the battery connectors
- Automatic recovery for deeply-discharged batteries
- 67mm high x 217mm wide x 314mm deep / 1.6kg
Range of Batteries Charged:
Parallel charging, from any state of charge, individually or linked: PAGlink HC-PL94T Model 9306
Parallel charging individually:
PAG L96e Model 9310A
PAG L96T Model 9305A
4 x Gold Mount.
Main Charge Programs:
Li-Ion Intelligent Parallel Charging program: maximum output 6A at 16.8V (100W approx.).
Up to 8 PAGlink batteries per channel may be charged. Batteries can be in any state-of-charge. The most-discharged batteries will be given a higher charge priority. Fully charged batteries stop accepting charge automatically and independently of other batteries.
Recovery Charge Program:
An automatic Recovery Charge Program enables deeply-discharged batteries to be charged. Additionally, the charger will automatically recover a Li-Ion battery where the output has been shut down.
Self Test Program:
Monitors the battery under charge, monitors the charger’s own functions, and shuts down to a safe condition should any tests fail.
100V to 265V AC. Frequency 50-60 Hz. Maximum consumption 220W.
Protected against short circuit and excess battery voltage.
AC Mains Failure Protection:
Should mains failure occur during a charging program, or whilst the charger is connected, it will shut down to a safe condition.
The charge status of each PAGlink battery is indicated by its own display. The different stages of the charging process are indicated for each channel on the charger’s LCD screen. The charger is fully automatic in operation.
Designed to comply with electrical safety standard BS EN 60065 and UL6500. NOTE: UK mains leads are fitted with a 1" fuse to BS1362 rated 5A as standard.
European Union Directives:
Complies with the following EU Directives:
EMC Directive 89/336/EU.
Low Voltage Directive 73/23/EU.
Operating Temperature Range:
0ºC to +40ºC (+32ºF to +104ºF).
Height: 67mm (2.64”).
Width: 217mm (8.54”).
Depth: 314mm (12.36”).
Typical Battery Charging Times:
1 battery: 2hrs 30mins
2 batteries: 3hrs
4 batteries: 6hrs
6 batteries: 9hrs 30mins
8 batteries: 11hrs 45mins
16 batteries: 24hrs
32 batteries: 48hrs
Charging times given are for fully-discharged 94 Watt-hour PAGlink batteries equally distributed across both channels.
Please enter your email address below. You will receive a link to reset your password.Ahh, wait, I remember now!