Utilizing Switronix’ award winning Hypercore technology, the Hypercore SLIM series was developed to provide the best in Lithium Ion technology for UAV, Handheld Gimbal and all other applications demanding a low-profile battery pack. The Hypercore Slim series is the first line of slim battery packs capable of handling high draw loads, perfect for powering cameras ranging from RED to ARRI. The packs are capable of handling draws of up to 148w (10A) without deterioration in service life nor operability.
With Lithium ion transport and travel being of utmost concern, this durable, 82wh 3-Stud battery pack falls within the range of accepted capacity for air travel. The HyperCore series delivers the most value and ROI for those who require battery packs to stand the test of time and deliver unrivaled performance.
The battery cells are incased in an over molded, rubberized housing, consistent with all Switronix’ battery packs for nearly 8 years. The case provides additional protection against accidental impacts; and the rubber texture reduces the chance of the battery slipping out of your hands.
Each battery is outfitted with an accelerometer to detect motion, a similar component that is in mobile devices. The accelerometer is tied to a clocking algorithm to gauge how long the battery is not in use. One of the issues with all battery packs is self-discharge when not in use. Hypercore battery packs will go to sleep or hibernate when there is no battery usage or movement after a 48hr period. Once you pick up the battery, or the battery detects the slightest movement, the battery pack awakens, coming back to life at its maximum capacity.
As with all Switronix brick battery offerings, the Hypercore series have an integrated, unregulated P-tap connection on the side of the battery allowing you to power any device accepting 12-16.8vdc.
Any charger within Switronix’ charger lineup will charge Hypercore, but the battery series is also the most cross platform, charger-compatible in the industry today. Switronix has transitioned its 3-stud (Gold) mount offerings to a Hypercore “Gold” series. The Gold series is 100% compatible with Anton/BauerTM chargers firmware V3.6 and up.
- High Draw(10A)
- 1000 charge/discharge cycle rating
- 4-LED Gauge
- High Density cells. More amperage per cell; less number of cells means less of a chance of a failure, less heat, longer service life
- All safety features incorporated into the battery (Over/Under Voltage, Over/Under Current, Temperature, etc.)
- Battery dictates charge routine
- Rubberized, non-slip housing
Nominal: 82 Wh (14.8 V, 5.5 Ah)
|Runtime||3.2 hours at 25 W load|
|Dimensions||3.8 x 5.9 x 1.5" (9.7 x 1.5 x 3.8 cm)|
|Weight||1.4 lb (0.64 kg)|
Please enter your email address below. You will receive a link to reset your password.Ahh, wait, I remember now!