Product was successfully added to your shopping cart.

My Cart (0)

Recently added item(s)

You have no items in your shopping cart.

Saturday, December 3, 2016

Teradek Bolt 300 3G-SDI Wireless Video Receiver

BP #: TER-BOLT-922  |  MFR #: 10-0922

Availability: In stock


Quick Overview

Wireless Receiver for the Teradek Bolt 300 system.


The Teradek Bolt 300 3G-SDI Receiver is part of the Bolt 300 system. It allows you to receive uncompressed video up to 1080p 60fps at a 4:2:2 color sampling from up to 300 feet away and can output using 3G-SDI or directly to a PC via USB 3.0 with the GRAB engine.


The Taradek Bolt Line:

The Teradek Bolt is a zero delay (< 1ms) wireless video system that transmits uncompressed 1080p60, 4:2:2 video up to 2,000ft over the unlicensed 5GHz band. The Bolt line-up comes in 3 ranges: 300, 600, and 2,000ft. The Bolt 300 has internal antennas, while the 600 and 2000 models have external antennas and an OLED screen for settings selection. All Bolt models are multicast capable up to 4 receivers, support timecode and metadata pass through, and include the USB 3.0 GRAB Engine.

Video Resolution 1080p: 60/59.94/50/30/29.97/25/24/23.98
1080psf: 30/29.97/25/24/23.98
1080i: 60/59.94/50
720p: 60/59.94/50
SD: 480i(NTSC)/576i(PAL)
Color Sampling Y:Cb:Cr/4:2:2, 8-bit (10-bit with no format conversion and FPGA v.1.1.0 or later)
Inputs N/A
Outputs 1 x 75 ohm BNC
1 x USB 3.0 micro B port
Delay <1 ms (when no video format conversion is enabled)
Audio Format 24-bit 48kHz PCM
Frequencies Non-DFS: 5.19 to 5.23 GHz, 5.755 to 5.795 GHz
DFS: 5.27 to 5.55 GHz, 5.67 GHz
RF Power 15 dBm EIRP
Range Up to 300' line of sight
Power Input 2-pin LEMO 7-28 VDC
Power Consumption 8.2 W
Operating Temperature 32 to 122°F / 0 to 50°C
Dimensions 1 x 3.5 x 5.8" / 25.2 x 88.9 x 146.5 mm
Weight 12.2 oz / 346 g