Product was successfully added to your shopping cart.

My Cart (0)

Recently added item(s)

You have no items in your shopping cart.

Wednesday, October 26, 2016
  • Teradek Bolt Pro 300 3G-SDI Wireless Transmitter-Receiver Set

Teradek Bolt Pro 300 3G-SDI Wireless Transmitter-Receiver Set

BP #: TER-BOLT-920  |  MFR #: 10-0920

Availability: Call for availability


Quick Overview

3G-SDI Video Transceiver Set


Comes with a 1 Bolt Pro 300 3G-SDI Transmitter AND 1 Bolt 300 3G-SDI Receiver

Transmit uncompressed 1080p video wirelessly over 300 feet with the Teradek Bolt Pro 300 3G-SDI Wireless Transmitter-Receiver Set. Included in this set are a Teradek Bolt 300 transmitter and receiver both equipped with 3G-SDI ports. The units in this kit are compact and feature internal antennas so they can fit on your camera rig and in your video village, DIT cart, or director's monitor rig.

When transmitting uncompressed video, latencies of less than one millisecond can be achieved if no other video processing is necessary. Unnoticeable latency is important for directors and focus pullers to see the action at the same time the camera does.

A boon for DITs, the USB GRAB engine streams the uncompressed video straight out of the receiver and into a PC for immediate recording. With this video available, rough edits can be made even before the footage is offloaded from the camera.


What's in the Box

• 1/4 20" Thumb Screw
• 1/2 20" Lightstand Adapter
• PSU 2-Pin Lemo 18W
• Hot Shoe Adapter
• Bit 118 P-tap to 2-pin Lemo
• 2x SDI Cable
• 1-Year Warranty

  Transmitter Receiver
Video resolution
480p59.94/576p50 (via HDMI ports only)
Color sampling Y:Cb:Cr = 4:2:2, 8-bit for SDI (10-bit with no format conversion and FPGA v.1.1.0 or later); RGB 4:4:4 (HDMI out, 8-bit color)
1 x 75 Ohm BNC
1 x Type A receptacle HDMI
  1 x USB 3.0 micro B receptacle
1 x 75 Ohm BNC(Loop-out) 1 x 75 Ohm BNC
  1 x Type A receptacle HDMI
Delay(TX to RX) <0.001sec when" no="" video="" format="" conversion="" is="" enabled="" td="">
Format support 48kHz 24-bit PCM
Non-DFS Frequencies:
US : 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz  
EU & JP : 5.19 ~ 5.23 GHz  
DFS Frequencies:  
US : 5.27 ~ 5.55 GHz and 5.67 GHz  
EU & JP : 5.27 ~ 5.67 GHz  
RF power 17dBm EIRP 15dBm EIRP
Range Up to 300ft line of sight
Unicast / Multicast Unicast/Multicast Unicast/Multicast
Noise rejection Can coexist with WiFi and 5GHz cordless phones
Input 2-Pin Lemo 7-28 VDC 2-Pin Lemo 7-28 VDC
Internal battery No No
Consumption(1080p60) 6.5 Watts 8.2Watts
LCD screen No No
Menu joystick No Yes
Size 1.06x2.61x4.42inches(27.0x66.1x112.3mm) 1.0x3.5x5.8inches(25.2x88.9x146.5mm)
Weight 9.2oz(262g) 12.2oz(346g)
Firmware Upgrade via Mini-USB
Operating temperature 0 ~ 50 deg-C
Chassis material
Cap:Plastic Cap:Plastic
Body:Milled aluminum Body:Milled aluminum
Hot-shoe mount Hot-shoe mount
Multiple mounting options with 1/4" holes Multiple mounting options with 1/4" holes