E-Mount to PL Adapter Pro (FS7) is a shimmable Sony E-Mount to PL mount adapter that enables mounting of all PL mount lenses onto the Sony PXW-FS7 camera. In our factory, we set the flange focus to match a Sony FS7 camera. You only need to adjust the shims should you find that your camera is out of calibration. The adapter is shimmable by loosening six socket cap screws around the collar area, separating the two sections, and adding color coded shims of various thickness. Back focus should be checked using collimation tools or a wide lens focused to infinity. Mount includes a support ring that integrates with our Top Plate (FS7), a highly recommended addition to this system. Loosen the support ring thumbscrew to quickly remove the mount and install another adapter. We are working on additional E-Mount to Canon, Nikon, etc. that will be available in the near future and will integrate with the same ring support.
This adapter will also work with any E-Mount camera like the A7, A7r, A7s, A7 II, FS100, FS700, NEX-5, NEX-6, NEX-7, etc, however, the support ring would not be utilized.
- Adapts Sony FS7 E-Mount to ARRI PL Mount
- Removable Support Brace
- Includes Set of Shims
- Includes PL Lens Port Cap
|Shim Thickness||Silver: 0.0005" / 0.0127 mm |
Amber: 0.001" / 0.0254 mm
Purple: 0.0015" / 0.0381 mm
Red: 0.002" / 0.0508 mm
Green: 0.003" / 0.0762 mm
Tan: 0.004" / 0.1016 mm
Blue: 0.005" / 0.127 mm
|Dimensions||4 x 4 x 3" (101.6 x 101.6 x 76.2 mm)|
|Weight||0.9 lb (408 g)|
Please enter your email address below. You will receive a link to reset your password.Ahh, wait, I remember now!