EIGRIG SLIDE-R1 (Mitchell, 150mm, 100mm, 75mm)

EIGRIG SLIDE-R1

PRODUCT OVERVIEW

Designed to set up quickly and easily, the SLIDE-R1 is a modular slider that is compatible with Mitchell, 150mm, 100mm, and 75mm tripod head mounts (all mounts are included). The SLIDE-R1 is equipped with a 3 foot and 4 foot track, but its versatile design allows you to mount it on Speedrails, 2x4 Studs, Extension Ladders and it can even roll on a smooth surface without any tracks. Everything you need is included in two (2) cases and it can be set up in minutes.

KEY FEATURES

• Compatible with Mitchell, 150mm, 100mm and 75mm Tripod Head Mounts (All Mounts Included)
• Ball/Bowl Head Mounts Feature Built-In Stepped 75mm, 100mm, And 150mm Rings
• 3’ And 4’ Tracks Included - Tracks Can Be Mounted On Support Stands With A Junior Receiver Or Baby Pin
• Works on Speedrails, 2x4 Studs, And Select Ladders
• Can Roll On The Ground Without Tracks
• Adjustable Width - Two (2) Sets Of Rods Included
• Three (3) Adjustable Feet Allow You To Get Low To The Ground
• Two (2) L-Brackets Prevent The Slider From Falling, And They Can Be Adjusted To Add Drag Or Lock The Slider Into Position
• Made From 6061 Anodized Aluminum And Stainless Steel

WHAT'S IN THE BOX

• (1) SLIDE-R1
• (1) Mitchell Plate
• (1) Cheese Plate
• (2) Adjustable Track Ends with leveling feet
• (1) 3 ft. Set of Track
• (1) 4 ft. Set of Track
• (1) Track Adapter
• (2) Speedrail Ends with leveling feet
• (1) Speedrail Center fitting
• (2) L-Brackets (act as a safety and a brake)
• (3) Junior/Baby Pins
• (1) Ball/Bowl Low Mode Mount Adapter 75mm, 100mm, 150mm
• (1) Ball/Bowl 6 in. Riser 75mm, 100mm, 150mm
• (1) Set of 34 in. Stainless Steel Rod Extensions
• (1) Mitchell Tie Down
• (1) 3/8 in. Tie Down
• (1) M10 Tie Down
• (1) Foamed/wheeled hard case for Slider and parts
• (1) Foamed/wheeled hard case for Track and 34 in. Extension Rods

SPECIFICATIONS